Bitaxe.de
NerdQaxe Stand rs 1000x1000

NerdQaxe Performance Case

Open three-part PLA case for the NerdQaxe – airflow instead of heat build-up

Item no.: 47415 · Manufacturer: Bitaxe.de

  • Three-part PLA case for the NerdQaxe series
  • Open design for high airflow
  • Rear prepared for 2 × 60 mm fans
  • Side cable channels, M3 screws included
4,9 · 30 Reviews
€29.00 incl. VAT

plus shipping · −5% with Bitcoin: €27.55

In stock · ships within 24 h

Free shipping from 200 € Ships within 24 h 14-day right of withdrawal

Product information

NerdQaxe Performance Case: an open enclosure with clear airflow

The NerdQaxe Performance Case is a three-part PLA enclosure designed for the NerdQaxe. The three parts are screwed into one unit with the included M3 screws: the miner sits firmly, the ports stay reachable and the build stands as a single piece on a desk, shelf or in a rack.

The difference to a closed case is deliberate. Large openings at the front and sides let warm air escape instead of letting it collect around the heatsink – and there is room for two additional fans at the rear.

Why an open case?

  • Air instead of a wall: the large openings prevent the ASIC’s heat from gathering inside the enclosure.
  • A second cooling layer: 2 × 60 mm fans can be fitted at the rear, for example the Noctua NF-A6x15.
  • Cables in channels: side cable channels route power and fan cables without laying them across the airflow.
  • A firm fit: three precisely fitting parts and M3 screws instead of loosely stacked plates.

What the case can do – and what it cannot

An open enclosure improves airflow, but it insulates nothing. If your NerdQaxe is too loud for you, the case will not change that; that comes down to fan curve and fan choice.

The two 60 mm rear fans are not included. Plan for them if you run higher performance profiles permanently. At stock settings many setups get along without extra fans – as described by customers who run the case exactly that way.

Who the Performance Case is for

For continuous operation and for everyone who wants to build their NerdQaxe properly into their setup: a firm build, routed cables, free ports. And for everyone who adjusts frequency and voltage and needs temperature headroom for it.

It is less of a fit if all you need is a stand. Then the NerdQaxe mount is the cheaper and simpler solution. And if you are after silence, the money is better spent on fans and cooling surface.

What you need to assemble it

Case and M3 screws come in the box, and you need a screwdriver. The easiest moment is right when setting up the NerdQaxe. Take a few minutes and lay the cables into the channels before tightening the last part – otherwise you will be redoing it. Optionally add two 60 mm fans and their power supply.

Accessories and sensible upgrades

  • Cooling: heatsinks and fans that absorb the heat before the case carries it away.
  • Mining accessories for cables, mounts and spare parts around the build.

Ready for your NerdQaxe performance setup?

The Performance Case is the choice when your NerdQaxe runs around the clock and you want to give it air, order and a fixed place: an enclosure that lets heat through instead of locking it in.

Frequently asked questions about the NerdQaxe Performance Case

Does the Performance Case fit every NerdQaxe?

It was developed for the NerdQaxe series. Check which model you run before ordering so that cutouts and mounting points match. Customers report that all cutouts sit in the right place on their device.

Are fans included?

No. Included are the three-part case and the M3 screws. The optional 2 × 60 mm rear fans are ordered separately, for example the Noctua NF-A6x15.

Which fans fit the rear?

Two fans with a 60 mm frame. A 40 mm fan such as the NF-A4x20 does not fit there – the mounting points are too far apart.

Will my NerdQaxe be quieter in the case?

No. An open enclosure does not insulate, it directs air. For less noise you need an adjusted fan curve or a quieter fan.

Will the miner run cooler in the case?

The open design prevents heat build-up, which is the main gain over a closed enclosure. Noticeably active cooling only comes with the two optional 60 mm rear fans.

What is the difference between the case and the NerdQaxe mount?

The NerdQaxe mount is a CF-PLA stand that provides a firm position. The case encloses the miner in three parts, brings cable channels and offers two additional fan mounts.

How long does assembly take?

A few minutes. Three parts, M3 screws, a screwdriver. Some patience helps, especially when routing the cables into the channels.

Do ports and display stay reachable?

Yes. The cutouts are designed for the NerdQaxe, so ports and display remain accessible once installed.

What material is the case made of?

PLA, printed in three precisely fitting parts. One customer notes that one edge of the surface could be a little cleaner – which has no influence on function or fit.

Do I need the case if I want to overclock?

Not strictly, but it often makes sense: more airflow means more temperature headroom.

Does the case fit a Bitaxe as well?

No, it is designed for the NerdQaxe series. The Bitaxe Gamma has a completely different form factor and already comes with its own stand.

Why buy from Bitaxe.de?

Free shipping from 200 €

Free shipping to almost every EU country from 200 €, shipping to the EU and Switzerland with UPS and a tracking link. Items in stock leave within 24 hours, with no customs surprises inside the EU.

Truly open source

Bitaxe, Nerdaxe, NerdQaxe & co. are open hardware running open firmware (AxeOS or NerdOS): you set pool, clock and voltage yourself. No cloud account, no vendor lock-in, no black box.

CE, warranty & returns

Every product carries the CE marking. Plus statutory warranty and a 14-day right of withdrawal for a safe order. If something is not right, we find a solution with you, person to person.

Direct support

Questions about setup, pool, firmware or your order? By email or Telegram you get help from someone who runs these devices themselves, in English or German, beginners welcome.

Customer reviews

4.9 / 5 · 30 reviews from customers who bought this product from us.

All reviews
08.10.2026
Hab das Case nur gekauft, weil der NerdQaxe neben dem Node so verloren aussah, jetzt passt das Bild im Regal. Morgens beim Kaffee kurz hingeschaut, mehr muss es nicht können.
Hubert Verified purchase
05.10.2026
Mit OSM-OS und mehr Takt bleibt der Chip unter 65 Grad, die Abwärme vom 92er kommt durch die offenen Seiten weg. Optisch wird aus dem Bastelprojekt ein richtiges Gerät.
Dragan Verified purchase
04.10.2026
Wow, jetzt ist der NerdQaxe ein echter Hingucker! Durch die großen Aussparungen sieht man Kühlkörper und Lüfter arbeiten, das hat was von einem offenen Gaming-PC, und so darf er gern im Regal stehen. Wer die Hand seitlich dranhält, spürt, wie die warme Luft ungehindert abzieht, da bleibt nichts hängen. Nach zwei Wochen freue ich mich immer noch über den Anblick, wenn ich ins Zimmer komme. Der Besuch am Wochenende musste sich das gleich von allen Seiten anschauen!
Gerd Verified purchase
22.09.2026
Mainly bought it for the two 60mm slots at the back... Noctuas are on order, plan is to push the clock a bit once they're in.
Cian Verified purchase
21.09.2026
Quick build, one print edge a bit rough.
Kenji Verified purchase
20.09.2026
I wanted something that gives the heatsink plenty of air and keeps stray fingers and cables off the board. This case manages both. It's more skeleton than box, chip temps haven't moved at all, and the board is shielded from the usual desk clutter alot better than before. Price is the sticking point for me: it's a printed part, and I sat on the order for two weeks before clicking buy. Still glad I got it, it just isn't cheap.
Viktor Verified purchase
Show all 30 reviews

Related guides

Setup, pool, cooling, power supply and sensible upgrades for your setup.

You might also like

NerdQaxe Performance Case

€29.00