Bitaxe.de
NerdAxe Gamma open-source Bitcoin miner black heatsink r s 2 800x800
−27%

Nerdaxe Gamma | 1.3 TH/s

The Bitaxe Gamma’s hardware with every value on a 1.9-inch display – 1.3 TH/s at 15 W

Item no.: NH10003NG · Manufacturer: Bitronics · Series: Nerdaxe

  • BM1370 ASIC, around 1.3 TH/s at roughly 15 W
  • 1.9-inch TFT instead of a small OLED strip
  • Available with mount or case
  • NerdOS in the browser, your pool, your address
4,8 · 140 Reviews
Hashrate
~1.3 TH/s
Efficiency
~15 J/TH
Power draw
~15 W
€219.00 €159.00 incl. VAT

plus shipping

Sold out

Choose mount

Notify me when it is back

One email as soon as this miner is in stock again. No newsletter.

Only for this product, cancel with one click. See our privacy policy.

Product information

Nerdaxe Gamma: Bitcoin miner with 1.3 TH/s and a large display

The Nerdaxe Gamma is an open-source Bitcoin miner for your home based on the BM1370 ASIC: around 1.3 TH/s at roughly 15 W, so about 15 J/TH. An ESP32-S3 runs the board itself and NerdOS lives directly on it. The most visible difference to the Bitaxe Gamma is the readout: a 1.9-inch TFT based on the LILYGO T-Display S3 shows the live figures in plain text instead of squeezing them onto a narrow OLED strip.

Cooling comes from a 40 mm PWM fan whose curve you define in NerdOS: audible in everyday use, noticeably more restrained with a flatter curve. At around 15 W the miner adds up to roughly 10.8 kWh a month in continuous operation.

When solo mining, the Nerdaxe Gamma works on the same task as an entire mining farm: finding a valid block. Every hash is its own lottery ticket, and if one of them lands, the complete block reward of currently 3.125 BTC plus transaction fees goes to your own Bitcoin address. Until then, your device checks transactions and helps secure the network. How realistic that is, is put into perspective in our solo mining guide.

Why people pick the Nerdaxe Gamma

  • Readable without a laptop: the 1.9-inch TFT shows the operating state on the device. For a glance in passing you do not need NerdOS at all.
  • Same chip class as the Bitaxe Gamma: the same BM1370, the same ballpark for hash rate and power draw. The premium goes into the display and the board design.
  • Configuration stays with you: pool, worker, address, frequency, voltage and fan curve are all set in NerdOS. No account, no contract, no third-party statement.
  • Openly documented: hardware design and firmware are open source. Spare parts, updates and community knowledge remain available even if a manufacturer loses interest.

The display and your choice between mount and case

The large TFT is the reason most people pick the Nerdaxe over the Bitaxe. Instead of a single narrow line you get a readout that stays legible from two metres away: hash rate and temperature in view without an open browser. That is what customers mention most often.

The Nerdaxe Gamma is also a variable product: at checkout you choose between the Nerdaxe mount and the Nerdaxe case, at the same price. On the mount the board stands open and you can reach heatsink, fan and connectors at any time. The case encloses the electronics and looks tidier when the device sits visibly in a living room. Hash rate and power draw are unaffected – it is about looks and location.

Up and running in minutes

Setup needs a socket, a 2.4 GHz Wi-Fi network and a browser. NerdOS lives on the miner itself, and the setup guide walks you through it step by step.

  1. 1

    Connect the miner

    Plug in the power supply and start the device. On first boot the Nerdaxe opens its own Wi-Fi network for configuration.

  2. 2

    Join your own Wi-Fi

    Connect to that network, select your own 2.4 GHz network and enter the password. The miner is then reachable through your router.

  3. 3

    Set pool and Bitcoin address

    Open NerdOS in a browser, store pool address, worker and your own Bitcoin address, save and restart. From then on the miner runs and the first shares go out.

Who the Nerdaxe Gamma is for

For home miners who want to see their hardware: the device sits visibly on the table and reports its state without a detour through the browser. For solo miners with their own address and sober expectations. And for everyone who wants a second miner in a different form factor next to their Bitaxe.

It is less of a fit if you watch every euro: the Bitaxe Gamma delivers the same hash rate for less, just with a small OLED. And if 1.3 TH/s is not enough, the Nerdaxe Gaia doubles the hash rate to around 2.6 TH/s in the same format and with the same display.

What you need to run it

Miner, 5V/6A power supply, stand or case and a quick start guide are included. From you come Wi-Fi, a socket and your Bitcoin address.

For continuous operation the location matters most: standing free, not in a closed cabinet, not above a radiator. In a living room the fan is worth a look – a flatter curve in NerdOS and a good 40 mm fan turn an audible miner into an unobtrusive device.

Accessories and sensible upgrades

The Nerdaxe Gamma is a starting point, not a closed system. Depending on where it stands, the next step is a quieter fan, more cooling surface or your own infrastructure.

  • Noctua NF-A4x20 as a replacement for the 40 mm stock fan when the miner lives in a living room.
  • Cooling for lower ASIC temperatures and headroom when overclocking.
  • Your own Bitcoin node, if your hash rate should later point at your own infrastructure.

Ready for your Nerdaxe Gamma setup?

If you want Bitaxe technology but prefer to read your miner’s state on the device rather than in a browser, the Nerdaxe Gamma is the right variant: same ASIC, bigger display, its own design. Mount or case is your choice at checkout.

Nerdaxe Gamma compared to similar miners

Model Hashrate Power Efficiency Price
Nerdaxe Gamma (this page) ~1,3 TH/s ~15 W ~15 J/TH €159.00
Bitaxe Gamma Copper Pro ~1,5 TH/s ~22 W ~15 J/TH €179.00
Bitaxe GT 2,15 TH/s 43 W ~20 J/TH €229.00

All values are guide figures. Compare all miners, calculate power cost.

Frequently asked questions about the Nerdaxe Gamma

What is the difference between the Nerdaxe Gamma and the Bitaxe Gamma?

The ASIC is the same: BM1370 with around 1.3 TH/s at roughly 15 W. Board design and readout differ. The Nerdaxe has a 1.9-inch TFT, the Bitaxe Gamma a 0.91-inch OLED and a lower price. If you want to read the figures on the device, take the Nerdaxe; if you want the cheapest route to 1.3 TH/s, take the Bitaxe. All models side by side are on buy a Bitcoin miner.

Should I choose the mount or the case?

Both variants cost the same and contain the same miner. On the mount the board stands open and stays accessible; the case encloses the electronics and looks tidier in a living room. Hash rate, power draw and setup are identical.

How much electricity does the Nerdaxe Gamma use?

Around 15 W, so roughly 10.8 kWh a month in continuous operation. Put your actual tariff into the mining calculator for a figure that fits your household.

How loud is the Nerdaxe Gamma?

In practice the 40 mm fan on the stock curve is audible in a quiet room and clearly audible at high frequency. Flatten the curve in NerdOS or swap the fan and it becomes very quiet; several customers run it exactly like that on a desk.

How much hash rate does the Nerdaxe Gamma have?

Around 1.3 TH/s at roughly 15 W, so about 15 J/TH. Treat it as a typical value: temperature, power supply, airflow and your NerdOS settings move the result a few percent either way.

What does the Nerdaxe Gamma display show?

The live operating values of the miner, above all hash rate and temperature. That is what the 1.9-inch TFT is for: status at a glance without a browser. All settings and the full statistics remain in NerdOS.

Do I need a PC or Raspberry Pi for it?

No. The ESP32-S3 on the board handles control and NerdOS runs on the miner itself. You only need a browser for setup and later changes.

Does the Nerdaxe Gamma work on 5 GHz Wi-Fi?

No, the ESP32-S3 only handles 2.4 GHz. If your router broadcasts both bands under the same name, give the 2.4 GHz band its own name in the router menu for the duration of the setup.

Can I solo mine with the Nerdaxe Gamma?

Yes. Instead of a large pool you enter a solo pool or your own node in the NerdOS pool field. At 1.3 TH/s a block find is pure lottery: the appeal lies in running real hardware on your own address, not in a plannable return.

Can I overclock the Nerdaxe Gamma?

Yes, frequency and voltage are set in NerdOS. More clock means more hash rate, but also more power draw, more heat and a louder fan. Move in small steps and keep an eye on the temperature.

Do I get firmware updates for the Nerdaxe Gamma?

Yes. NerdOS is open source and under active development; updates are applied through the web interface. Allow a few minutes the first time to find the right file for your board.

What is the difference to the Nerdaxe Gaia?

The Nerdaxe Gaia uses the newer BM1373: around 2.6 TH/s at roughly 25 W, so about 10 J/TH instead of 15 J/TH. It is the twice-as-fast variant of the same form factor, at a higher price.

Why buy from Bitaxe.de?

Free shipping from 200 €

Free shipping to almost every EU country from 200 €, shipping to the EU and Switzerland with UPS and a tracking link. Items in stock leave within 24 hours, with no customs surprises inside the EU.

Truly open source

Bitaxe, Nerdaxe, NerdQaxe & co. are open hardware running open firmware (AxeOS or NerdOS): you set pool, clock and voltage yourself. No cloud account, no vendor lock-in, no black box.

CE, warranty & returns

Every product carries the CE marking. Plus statutory warranty and a 14-day right of withdrawal for a safe order. If something is not right, we find a solution with you, person to person.

Direct support

Questions about setup, pool, firmware or your order? By email or Telegram you get help from someone who runs these devices themselves, in English or German, beginners welcome.

Customer reviews

4.8 / 5 · 140 reviews from customers who bought this product from us.

All reviews
06.10.2026
Choosing the case version was easy for us because our cat inspects everything new that appears on a shelf and a bare circuit board with a spinning fan looked like an open invitation. Four months later the board is still covered and the cat has lost interest completely. The case also keeps most of the dust off which matters in an old flat with the windows open half the summer. Setting it up was less scary than I expected for someone who had never done anything like this. The part that took longest was copying my Bitcoin address over and checking it three times. Since then it has been sitting on the hallway shelf showing about 1.1 TH/s and a chip temperature in the high fifties. I had to ask a friend what half the numbers mean and I still do not fully get difficulty but I like seeing it work away. When the power went out for an hour in August it came back on its own and carried on as if nothing had happened. If I ordered another one I would pick the case again without a second thought.
Kristjan Verified purchase
27.09.2026
Halbes Jahr Dauerbetrieb, übertaktet stabile 1,3 TH/s!
Emre Verified purchase
12.09.2026
Geschenk zum 18. Geburtstag meines Patenkinds, das schon mit zwölf seinen ersten Rechner zusammengeschraubt hat. Ich selbst verstehe von Mining so gut wie nichts und kann nur beurteilen, was ich mitbekommen habe: Die Bestellung lief unkompliziert, das Paket kam rechtzeitig und gut gepolstert an, ein Netzteil lag gleich dabei. Am Telefon hat er mir danach zehn Minuten lang erklärt, was die beste Difficulty ist und warum seine gerade gestiegen sei. Verstanden habe ich wenig, gefreut hat er sich hörbar.
Dennis Verified purchase
11.09.2026
Gut eine Woche hat die Zustellung gedauert, das kenne ich von anderen Bestellungen flotter. Eingerichtet war er dann in fünf Minuten, Pool und Adresse tippe ich inzwischen im Schlaf. Ich hab den Takt auf 600 MHz gestellt, seid dem stehen um die 1,23 TH/s bei rund 19 W auf dem Display, Chip bei 58 Grad, VR knapp unter 50. Optisch passt das bunte TFT unter dem zweiten Monitor erstaunlich gut zu meinem restlichen RGB-Gedöns. meistens lasse ich die Seite mit Effizienz und Temperaturen stehen, der Rest interessiert mich selten.
Lenny Verified purchase
08.09.2026
Chegou em dois dias, bem embalado, ecrã enorme.
Tiago Verified purchase
08.09.2026
Beefy 5V/6A brick in the box, so I nudged the clock up without worrying about power. The firmware update though had me hunting for the right board files.
Fernando Verified purchase
Show all 140 reviews

Related guides

Setup, pool, cooling, power supply and sensible upgrades for your setup.

You might also like

Nerdaxe Gamma | 1.3 TH/s

€159.00