Bitaxe.de
Noctua NF-A6x15

Noctua NF-A6x15 Silent Fan

Slim 60 mm PWM fan at 19.8 dB for NerdQaxe mounts and cases

Item no.: 51668 · Manufacturer: Noctua

  • 60 × 60 × 15 mm – slim 60 mm frame
  • 19.8 dB with an even running noise
  • 5 V and 0.85 W, 4-pin PWM cable
  • For 60 mm mounts, not for 40 mm boards
4,9 · 22 Reviews
€30.00 incl. VAT

plus shipping

Sold out

Notify me when it is back

One email as soon as this miner is in stock again. No newsletter.

Only for this product, cancel with one click. See our privacy policy.

Product information

Noctua NF-A6x15: a 60 mm fan for more air at low speed

The Noctua NF-A6x15 measures 60 × 60 × 15 mm, making it a 60 mm fan that still fits where things are tight. It runs at 5 V and is PWM controlled through a 4-pin cable – control stays with your miner and its fan curve.

Rated figures are 19.8 dB at 0.85 W. The fan is audible but even, and at 0.85 W it changes nothing meaningful about power draw.

Why a 60 mm fan at all?

  • More air per revolution: the larger area of a 60 mm fan achieves more throughput at low speed than a small 40 mm one. Quiet here comes from speed, not from doing without.
  • Slim build: at 15 mm deep it fits builds where a thick 60 mm fan would collide.
  • Familiar connection: 4-pin PWM at 5 V, so no external controller and no separate power supply.
  • Honest classification: 19.8 dB is not silent. Customers mainly praise the calmer running noise – at maximum speed you hear this one too.

Where the NF-A6x15 belongs

Anywhere a 60 mm frame is provided. The NerdQaxe Copper Pro is designed for a 60 mm fan from the factory, and the NerdQaxe Performance Case takes two 60 mm fans at the rear for active back-panel cooling. It also fits the Bitaxe Gamma Copper Pro: there it sits on the 60 mm fan mount of the factory-fitted AXP60 cooler.

It does not fit boards with a 40 mm fan mount such as the regular Bitaxe Gamma or the Nerdaxe Gamma – the NF-A4x20 belongs there. The Gamma Copper Pro is the exception: its AXP60 cooler carries a 60 mm fan. It also does not fill the 92 mm mount of a NerdQaxe++; there it only makes sense inside the Performance Case as additional rear cooling.

Who the NF-A6x15 is for

For setups with a 60 mm mount in continuous operation: if you actively ventilate the rear of your NerdQaxe or swap an existing 60 mm fan for a calmer one, you gain temperature headroom without raising the noise floor.

It is less suitable in two cases: on a board with a 40 mm fan mount it simply does not fit, and if you expect absolute silence, keep the 19.8 dB in mind – at full speed a fan remains a fan.

What you need to fit it

A free 60 mm fan mount, a 5 V connector with PWM and a screwdriver. If you want to run two fans in the Performance Case, work out beforehand how both get power. After fitting, check ASIC temperature and fan speed, just as when setting up the NerdQaxe.

Accessories and sensible upgrades

  • AXP60 Copper Pro: more cooling surface so the fan can spin slower.
  • Cooling for heatsinks, kits and fans that together make a quiet setup.

Ready for a quieter NerdQaxe setup?

The NF-A6x15 is the right choice when your build offers a 60 mm mount and you want to keep temperature and noise under control at the same time. It does not replace cooling surface, but it makes sure the surface you have gets air even at low speed.

Frequently asked questions about the Noctua NF-A6x15 Silent Fan

How loud is the Noctua NF-A6x15?

The rating is 19.8 dB. That is noticeable in a quiet room but even and without disturbing bearing noise. At full speed you hear it clearly – in everyday use the fan curve usually keeps it far below that.

Does the NF-A6x15 fit a Bitaxe Gamma?

No. The Bitaxe Gamma has a 40 mm fan mount, so a 60 mm fan is too large. The Noctua NF-A4x20 is the right size for that board. The Bitaxe Gamma Copper Pro is different: its AXP60 cooler carries a 60 mm fan, and that is where the NF-A6x15 fits.

Does the fan fit the NerdQaxe Performance Case?

Yes. The rear of the NerdQaxe Performance Case is prepared for two 60 mm fans, which is exactly this size. The fans are not included with the case, so you order them separately.

What is the difference between the NF-A6x15 and the NF-A4x20?

The NF-A4x20 is a 40 × 40 × 20 mm fan at 14.9 dB and 0.5 W for the stock mounts on Bitaxe and Nerdaxe boards. The NF-A6x15 measures 60 × 60 × 15 mm at 19.8 dB and 0.85 W and moves more air at the same speed.

How much electricity does the fan use?

0.85 W at 5 V – practically nothing in continuous operation.

Exactly how slim is the fan?

15 mm deep with a 60 mm frame. That is exactly what it is for: 60 mm of area in places where a thicker fan no longer fits.

Do I need a separate fan controller?

No. The fan has a 4-pin PWM cable and runs at 5 V, so it works with your miner’s existing control.

Can I run two fans at once?

Yes, the Performance Case is designed for exactly that. Work out how both fans are supplied before fitting – with only one free header you need a splitter.

Does the fan fit directly onto the NerdQaxe++?

Not on the main mount: the NerdQaxe++ comes with a 92 mm fan. A 60 mm fan only becomes useful there inside the Performance Case, which offers two additional positions at the rear.

Does the fan bring more hash rate?

Not directly. It lowers the temperature, and a cooler ASIC runs more stably – especially if you adjust frequency and voltage.

Does the fan replace a larger heatsink?

No. A fan carries away heat that the heatsink has to absorb first. If temperatures are permanently too high, more cooling surface is the first step and the fan the second.

Why buy from Bitaxe.de?

Free shipping from 200 €

Free shipping to almost every EU country from 200 €, shipping to the EU and Switzerland with UPS and a tracking link. Items in stock leave within 24 hours, with no customs surprises inside the EU.

Truly open source

Bitaxe, Nerdaxe, NerdQaxe & co. are open hardware running open firmware (AxeOS or NerdOS): you set pool, clock and voltage yourself. No cloud account, no vendor lock-in, no black box.

CE, warranty & returns

Every product carries the CE marking. Plus statutory warranty and a 14-day right of withdrawal for a safe order. If something is not right, we find a solution with you, person to person.

Direct support

Questions about setup, pool, firmware or your order? By email or Telegram you get help from someone who runs these devices themselves, in English or German, beginners welcome.

Customer reviews

4.9 / 5 · 22 reviews from customers who bought this product from us.

All reviews
11.11.2026
der Noctua NFsilent kommt zwar mit vielen Kleinteilen, aber 2 einfache Befestigungsklammern für die Standdardbefestigung am Gamma Copper waren nicht dabei.
Torsten Verified purchase
01.10.2026
beim ersten einschalten drehte er kurz richtig hoch, und ich dachte schon, das bleibt jetzt so laut. nach ein paar sekunden hat der miner ihn dann runtergeregelt, das ist wohl dieses pwm, von dem alle reden, eingestellt habe ich dafür nichts. sitzt hinten im case von meinem nerdqaxe, stecker an den freien anschluss, fertig. bestellt hatte ich an einem freitag, am dienstag lag er gut verpackt im briefkasten.
Dennis Verified purchase
24.09.2026
Keksflach, PWM folgt der PID-Regelung suaber!
Tobias Verified purchase
20.09.2026
got it together with the ice tower lp for my gamma, my brother runs the same combo and says two fans can spin slower than one. i was nervous about breaking something, but he talked me through it on the phone and nothing broke. a week later the miner on my desk is quieter and the fan number in the dashboard went down. my boyfriend says it looks like a tiny hovercraft now lol
Zuzanna Verified purchase
12.09.2026
Lieferzeit drei Tage, seither ein halbes Jahr Dauerbetrieb an der PWM-Kurve, kein Lagergeräusch, kein Aussetzer – damit das einzige Bauteil im Mining-Keller, dessen Statistik nie schlechter wird.
Detlef Verified purchase
11.09.2026
My home office is the box room at the front of the house: desk, bookshelf, a printer I hate, and since spring a NerdQaxe++ in the Performance Case on the top shelf, roughly an arm's length from my left ear. I'm on calls most of the day, so anything that hums in bursts gets on my nerves fast, and the miner had a habit of doing exactly that whenever its big fan stepped up. After reading far too many forum threads over lunch, I went for a single 60 mm fan at the back. It plugs into the free 4-pin header and simply follows the miner's PWM control, no extra controller, no separate power brick, which was the bit I'd been dreading. What I love is how it ramps: no audible steps, just a soft, steady whoosh that rises and falls a little. The big fan kicks in far less often now, and nobody on my calls has asked about the 'fish tank noise' since. I'm properly chuffed. The printer, sadly, is as loud as ever.
Jess Verified purchase
03.09.2026
Slim, arrived fast, only the cable's long!
Karim Verified purchase
30.08.2026
Vorab: Ich bin kein Bastler, das war das erste Mal, dass ich an einem Miner überhaupt etwas umgebaut habe. Auf meinem Gamma sitzt seit dem Frühjahr der flache ICE Tower, und auf dessen Produktseite stand, dass ein zweiter 60er draufpasst. Meine größte Sorge war der Strom, ich dachte, so ein Lüfter braucht ein eigenes Netzteil. Braucht er nicht: Der Stecker mit den vier Pins kommt an das Verteilerkabel, das beim Kühler dabei war, und ab da regelt der Miner beide Lüfter über PWM. Beim ersten Versuch hatte ich ihn falsch herum eingesetzt, die Chiptemperatur ging hoch statt runter. Also umgedreht, sodass er in dieselbe Richtung bläst wie der andere, seitdem stimmt es. In der Weboberfläche steht inzwischen eine niedrigere Lüfterprozentzahl als vorher, und der Miner auf dem Regal ist nach einem Monat Dauerbetrieb hörbar ruhiger. Für jemanden, der sonst nicht mal eine Lampe selbst anschließt, war das ein ziemlich entspannter Umbau.
Ralf Verified purchase
27.08.2026
Hinten am Case endlich beide Plätze besetzt!
Lars Verified purchase
26.08.2026
Snel geleverd en zit nu achterin de case.
Niels Verified purchase
10.08.2026
Ich hatte das Performance Case schon im Mai gekauft, die beiden 60er-Plätze hinten aber erst mal frei gelassen. Dann kamen Ende Juli die heißen Tage, im Gästezimmer mit Südfenster wurde es richtig warm, und der 92er vom NerdQaxe++ drehte tagsüber ordentlich hoch. Also zwei Stück bestellt, die Versandbestätigung kam noch am selben Tag, und zwei Tage später lag das Päckchen beim Nachbarn. Jeder Lüfter steckte im eigenen kleinen Karton, nichts verbogen, nichts lose. Der Einbau hat keine Viertelstunde gedauert, das meiste davon war Kabel verlegen. Seitdem halten die Chips ihre Zieltemperatur, ohne dass der Hauptlüfter ständig aufdrehen muss, und von hinten hört man nur ein leises Säuseln. An der Hashrate ändert das natürlich nichts, die steht weiter bei knapp 4,9 TH/s, aber die ganze Kiste wirkt viel entspannter. Ich freu mich fast schon auf die nächste Hitzewelle, nur um zu sehen, wie sich das Setup dann schlägt!
Dominik Verified purchase
03.08.2026
Ergänzt bei mir den Noctua auf dem ICE Tower LP. Aus einem Meter bleibt ein gleichmäßiges, tiefes Rauschen ohne Klackern oder Pfeifen, das angenehmer klingt als der kleine 40er, der vorher auf dem Gamma saß.
Robert Verified purchase
02.07.2026
Vissé à l'arrière du Performance Case de mon NerdQaxe en dix minutes, alors que je n'avais jamais touché à un ventilo. Seul bémol : ce beige-marron, qui jure sur l'étagère.
Jérôme Verified purchase
23.06.2026
Catch: as second fan on the ICE Tower LP it hangs off the Y-splitter, so both share one PWM duty. Otherwise: 15 mm, stack stays low, even hiss at target.
Tadej Verified purchase
28.05.2026
Den Anfang machte Mitte März der ICE Tower LP auf meinem Gamma: Zum Noctua aus dem Kit kam einer davon als zweiter Lüfter dazu, und seitdem traue ich mich beim Takt ein Stück weiter nach oben. Anfang Mai folgte das Performance Case für den NerdQaxe++, hinten sitzen jetzt zwei weitere, per Splitter an einem gemeinsamen Header. Neben dem 92er gehen die beiden klanglich komplett unter. Macht drei Stück, und Nummer vier liegt schon im Warenkorb.
Mike Verified purchase
26.05.2026
Désormais, le plus bruyant du bureau, c'est mon clavier mécanique : ce Noctua de quinze millimètres, monté côté arrière dans le Performance Case, est piloté en PWM à un régime où on l'oublie.
Guillaume Verified purchase
23.05.2026
Mit 15 mm Bautiefe passt er, wo mein alter 60x25 angestoßen ist, und über PWM regelt der Miner ihn stufenlos mit. Für einen einzelnen 60er kein Schnäppchen, auch mit Bitcoin-Rabatt.
Felix Verified purchase
23.05.2026
Zusammen mit dem Performance Case Ende April geordert, beides kam in einem Karton noch vor dem Wochenende. Der Lüfter sitzt auf einer der beiden 60-mm-Positionen an der Rückseite, verschraubt mit den M3-Schrauben, die dem Case beiliegen. Das Kabel läuft durch den Kabelkanal zum 4-Pin-PWM-Header des NerdQaxe++, die Regelung übernimmt NerdOS ohne weiteres Zutun. Seitdem wird die Rückseite der Platine im Dauerbetrieb nicht mehr so heiß wie vorher, und akustisch fällt der zusätzliche Lüfter nicht weiter auf.
Siegfried Verified purchase
18.05.2026
added to my ice tower lp, way quieter!
Wouter Verified purchase
15.05.2026
Der Pöstler klingelte, bevor ich mich entschieden hatte, ob ich mir den Einbau überhaupt zutraute. Gedauert hat das Ganze dann fünf Minuten, die drei Erklärvideos vorher nicht mitgerechnet.
Flurin Verified purchase
07.05.2026
Vorher rasselte hier ein billiger 60er wie ne Kaffemühle. Der Noctua hängt am selben PWM-Anschluss und rauscht unter PID bei 40 Prozent nur gleichmäßig warum hab ich so lange gewartet.
Udo Verified purchase
01.05.2026
kam ruckzuck, sitzt jetzt als nummer zwei auf dem kühler von meinem gamma, die drehzahl macht der miner per pwm ganz allein, echt cool! einziger haken: ohne y-splitter geht's nicht.
Tim Verified purchase

Related guides

Setup, pool, cooling, power supply and sensible upgrades for your setup.

You might also like

Noctua NF-A6x15 Silent Fan

€30.00