NerdQX | 8 TH/s
8 TH/s at 140 W in a closed case – 38 dB, colour LCD, NerdOS
Item no.: 13473 · Manufacturer: Bitaxe.de
- Around 8 TH/s at about 140 W
- NerdOS in the browser, 2.4 GHz Wi-Fi, USB-C
- Sits between NerdQaxe++ and NerdOctaxe
- Power supply, stand and guide included
- Hashrate
- ~8 TH/s
- Efficiency
- ~17 J/TH
- Power draw
- ~140 W
plus shipping · −5% with Bitcoin: €445.55
In stock · ships within 24 h
Product information
NerdQX: open-source Bitcoin miner with around 8 TH/s
The NerdQX, labelled NerdQX-8.1T on delivery, is an open-source Bitcoin miner for the home in the upper middle class. Four BM1370 ASICs deliver around 8 TH/s at about 140 W, the firmware is NerdOS, the connection runs over 2.4 GHz Wi-Fi and a USB-C port is present. As with every device in this family, you enter pool, worker and Bitcoin address yourself, and nobody settles accounts on your behalf.
Power draw sits at around 140 W, which works out to roughly 17 J/TH. Cooling runs through a heatpipe heatsink with a 120 mm front and a 90 mm rear fan – in operation the device stays at around 38 dB. A colour display on the device shows hash rate and temperature without opening a browser. Plan for this all the same: a miner in this class needs more air and a better location than a 1.3 TH/s device.
In solo mining, all that counts is how many tickets you throw into the draw. At around 8 TH/s that is roughly six times as many as with a Bitaxe in the 1.3 TH/s class. If one of them hits, the full block reward of currently 3.125 BTC plus transaction fees goes to your own address, undivided and without an intermediary. It remains a lottery with very long odds, as our solo mining guide explains. The certain contribution is the other one: your device verifies transactions and helps secure the network.
What speaks for the NerdQX
- More hash rate without a rack: around 8 TH/s in a device meant for a flat, an office or a homelab, not for a mining container.
- Familiar operation: NerdOS in the browser, exactly as on the smaller Nerdaxe models. If you already run one, there is nothing new to learn.
- No middleman for your hash rate: pool, worker and Bitcoin address are yours. There is no statement you cannot verify yourself.
- Delivered ready to run: miner, power supply, stand and quick start guide are included. From you come a socket, Wi-Fi and an address.
Where the NerdQX sits between NerdQaxe++ and NerdOctaxe
The family is graded by hash rate, and the NerdQX fills the gap in the middle. Below it sits the NerdQaxe++ with around 4.8 TH/s at roughly 80 W, above it the NerdOctaxe with around 12 TH/s at roughly 200 W. The NerdQX sits exactly between them at about 140 W.
Efficiency stays on the family level: around 17 J/TH, practically level with the NerdQaxe++ and NerdOctaxe. You are choosing the hash rate step alone – efficiency and handling are the same across all three.
Up and running in minutes
Even on the larger device the setup stays the same: position it, join Wi-Fi, enter the pool.
- 1
Position and connect
Find the miner an open spot with air on all sides and connect the power supply. Location matters more here than on the small models: closed cabinets and tight shelf compartments are out.
- 2
Connect to Wi-Fi
On first boot you configure the device through its own Wi-Fi network and store your 2.4 GHz home network. A 5 GHz-only network will not be detected.
- 3
Enter pool and Bitcoin address
In NerdOS you enter the pool address, worker and your Bitcoin address, save and restart. The individual steps are in the NerdQaxe setup guide.
Who the NerdQX is for
For home miners who have already run one or two smaller devices and now want more hash rate without moving to industrial hardware. And for tinkerers: hash rate, temperatures and the fan curve are all exposed in NerdOS, and frequency and voltage are yours to set.
It is less of a fit as a first step into mining – for that it is oversized; a device in the 1.3 TH/s class is enough for that.
What you need to run it
The box contains the miner, a 12.4 V / 20 A power supply, a 3D-printed stand and a quick start guide. From you come a socket, 2.4 GHz Wi-Fi, a browser and your own Bitcoin address.
Plus a location where a running fan bothers nobody and warm exhaust air can escape. In continuous operation it is worth watching the temperature readout in NerdOS for a few days and setting the fan curve afterwards.
Accessories and sensible upgrades
With the NerdQX it is less about accessories on the device and more about its surroundings: cooling, clean power and the question of what your hash rate works against.
- Cooling for heatsinks and quieter fans. Check dimensions and mounting against your device first.
- Power supplies, mounts and small parts that keep the setup tidy in continuous operation.
- Bitcoin nodes if your hash rate should eventually point at your own infrastructure.
Ready for your NerdQX setup?
Around 8 TH/s at about 140 W, NerdOS and your own address: the NerdQX is the step for everyone who has outgrown the 1.3 and 4.8 TH/s classes and still wants a device that can live at home.
NerdQX compared to similar miners
| Model | Hashrate | Power | Efficiency | Price |
|---|---|---|---|---|
| NerdQaxe++ Hydro | ~6 TH/s | 100W | 16,7 J/TH | €399.00 |
| NerdQX (this page) | ~8 TH/s | ~140 W | ~17 J/TH | €469.00 |
| Nexus S1-02 | ~10 TH/s | ~150 W | ~15 J/TH | €699.00 |
All values are guide figures. Compare all miners, calculate power cost.
Frequently asked questions about the NerdQX
How much hash rate does the NerdQX have?
How much electricity does the NerdQX use?
How loud is the NerdQX?
What is the difference between the NerdQX and the NerdQaxe++?
What is the difference to the NerdOctaxe?
Which firmware runs on the NerdQX?
Does the NerdQX work on 5 GHz Wi-Fi?
Do I need a PC or Raspberry Pi for the NerdQX?
Can I solo mine with the NerdQX?
Is the NerdQX suitable for beginners?
What is in the box?
Can I overclock the NerdQX?
Why buy from Bitaxe.de?
Free shipping from 200 €
Free shipping to almost every EU country from 200 €, shipping to the EU and Switzerland with UPS and a tracking link. Items in stock leave within 24 hours, with no customs surprises inside the EU.
Truly open source
Bitaxe, Nerdaxe, NerdQaxe & co. are open hardware running open firmware (AxeOS or NerdOS): you set pool, clock and voltage yourself. No cloud account, no vendor lock-in, no black box.
CE, warranty & returns
Every product carries the CE marking. Plus statutory warranty and a 14-day right of withdrawal for a safe order. If something is not right, we find a solution with you, person to person.
Direct support
Questions about setup, pool, firmware or your order? By email or Telegram you get help from someone who runs these devices themselves, in English or German, beginners welcome.
Customer reviews
4.8 / 5 · 4 reviews from customers who bought this product from us.
Waited almost two weeks on backorder which annoyed me and the PSU brick barely fits behind my desk but for a month now it hovers around 6.3 TH/s on stock.
Vier BM1370 schaffen mit dem OC-Profil (1000 MHz/1250 mV) knapp 8 TH/s bei etwa 150 W. Elf Tage Nachbestellung gingen noch, der Netzteilklotz passt dagegen hinter kein Regal.
Nachbestellung 12 Tage, OC-Profil gut 140 W, passt.
Moest twee weken wachten, maar draait verassend stil.
Related guides
Setup, pool, cooling, power supply and sensible upgrades for your setup.
You might also like
NerdQaxe++ Rev7 | 4.8 TH/s
NerdOctaxe | 12 TH/s
NerdQaxe++ Hydro | 6 TH/s