Thermal paste 12.8 W | 2 g
Fresh thermal paste for swapping the cooler on a Bitaxe, Nerdaxe or NerdQaxe: 2 g in a syringe, not electrically conductive according to the manufacturer
Item no.: 12812 · Manufacturer: Bitaxe.de
- For swapping the cooler on a Bitaxe, Nerdaxe or NerdQaxe
- 2 g in a syringe, enough for several swaps
- Not electrically conductive according to the manufacturer
- Thermal conductivity 12.8 W/(m·K) and up to 240 °C per the manufacturer
plus shipping · −5% with Bitcoin: €4.74
In stock · ships within 24 h
Product information
Thermal paste for the Bitaxe, Nerdaxe and NerdQaxe
A thin layer of thermal paste sits between the ASIC and the heatsink. It fills the fine gaps between the two surfaces that would otherwise hold air, and air conducts heat poorly. Once you take the cooler off, you need fresh paste: when upgrading to the AXP60 Copper Pro, when replacing the stock cooler with an AirBlock 40, or when the chip runs clearly hotter than it used to at the same clock with a clean fan.
What the manufacturer states
According to the manufacturer the paste conducts heat at 12.8 W/(m·K), withstands −20 to 240 °C and is not electrically conductive. We have not measured the thermal conductivity ourselves, and such figures are hard to compare between brands because every manufacturer measures differently. For a home miner what counts most is a thin layer without gaps.
How to apply it
Disconnect the miner from power and take the cooler off. Clean the old paste off the chip and the cooler base with isopropyl alcohol and a lint-free cloth until both surfaces are clean and dry. Put a small dot of paste in the middle of the chip and seat the cooler straight; the mounting pressure spreads the paste. On devices with several chips, such as the NerdQaxe++, each chip gets its own dot.
More paste does not help, it only makes the layer thicker. Wipe off anything that ends up next to the chip. Afterwards close the syringe and store it clean and cool, as the manufacturer recommends.
Frequently asked questions about the Thermal paste 12.8 W
Do I need fresh thermal paste when I take the cooler off?
How much paste do I need for a Bitaxe?
Is the paste electrically conductive?
Does it work with the AXP60 Copper Pro and the AirBlock 40?
What do I use to remove the old paste?
What do the 12.8 W/(m·K) mean?
Why buy from Bitaxe.de?
Free shipping from 200 €
Free shipping to almost every EU country from 200 €, shipping to the EU and Switzerland with UPS and a tracking link. Items in stock leave within 24 hours, with no customs surprises inside the EU.
Truly open source
Bitaxe, Nerdaxe, NerdQaxe & co. are open hardware running open firmware (AxeOS or NerdOS): you set pool, clock and voltage yourself. No cloud account, no vendor lock-in, no black box.
CE, warranty & returns
Every product carries the CE marking. Plus statutory warranty and a 14-day right of withdrawal for a safe order. If something is not right, we find a solution with you, person to person.
Direct support
Questions about setup, pool, firmware or your order? By email or Telegram you get help from someone who runs these devices themselves, in English or German, beginners welcome.
Related guides
Setup, pool, cooling, power supply and sensible upgrades for your setup.